Operating; Starting The Device; Main Menu - Varytec 386284 User Manual

Operating

7 Operating

7.1 Starting the device

7.2 Main menu

Main menu Menu level 2
Meaning
'DMX ' DMX mode selection and DMX address setting
'RUN MODE'
'SET UP'
LED Typhoon PAR Outdoor 12x10, LED Typhoon True PAR 12x10 Outdoor
16
LED outdoor PAR
Connect the device to the power supply to start operation. After a few seconds, the
display indicates that a reset is in progress. The device is then ready for use. The dis-
play shows the operating mode that was selected when the unit was last powered
off.
Press [ENTER] to activate the main menu. Use the buttons [UP] or [DOWN] to select a
submenu. When the display shows the desired submenu, press [ENTER] to open it. To
close the main menu, press [MODE].
All previously made settings are retained even when you disconnect the device from
the power grid. To restart with default values, use the 'RESET' function.
The following table shows the setting options.
Menu level 3
'CHANNEL 03' 3-channel DMX mode
'CHANNEL 06' 6-channel DMX mode
'CHANNEL 08' 08-channel DMX mode
'CHANNEL 10' 10-channel DMX mode
'CHANNEL 13' 13-channel DMX mode
'ADDRESS 001' ... Setting the DMX address
'ADDRESS 512'
'DMX' Operating mode 'DMX'
'SLAVE' Operating mode 'Slave'
'ID number' Setting an individual device ID. This allows groups of devices with the same
DMX address to be controlled individually via DMX channel 13.
'OFF'
'1' ... '66'
'Display Led' Automatic display shutdown when not in use
'ON'
'OFF'
Menu level 4
No ID assigned
Individual device ID
Enabled
Disabled