Radio Shack TAD-728 Owner's Manual page 37

43-728.fm Page 37 Thursday, August 26, 1999 8:53 AM
2. When the outgoing message ends,
press then enter your 2-digit PIN
within 2 seconds.
The TAD announces "You have xx
new message(s)" (where xx is the
numbers of messages) or "You have
no messages," then the TAD plays
back the recorded messages contin-
uously. When you have both old and
new messages, the TAD first plays
back only the new messages. Press
to hear the old messages.
8
3. During playback, you can press the
number key for the command you
want.
Press:
Skip to the previ-
7
ous message.
8 Repeat the cur-
rent message.
9 Skip to the next
message.
Stop message
playback.
Delete the current
0 twice within
message.
2 seconds
After all messages have been played
back (or you finished playing back by
pressing ), you can continue to ac-
cess other features.
To record a new outgoing message:
1. Press twice within 2 seconds. The
1
TAD beeps.
2. Record your new outgoing mes-
sage.
3. Press
the recorded outgoing message
plays back.
To record a memo:
1. Press
2. Record your message.
3. Press
recorded memo plays.
To listen to help guidance:
Press
voice prompts to guide you through re-
To:
mote operation.
To set the TAD to answer/not answer
calls:
Press
rent outgoing message or "Answer off."
Repeatedly press
playback to turn the TAD on, choose
one of the prerecorded or your own
message, or turn the TAD off. You hear
"Answer off."
or . A beep sounds and
1
. The TAD beeps.
3
. The TAD beeps and the
3
and the TAD plays a series of
. The TAD announces the cur-
4
during the OGM
4
37