Paging From The Base To The Handset; Paging From The Handset To The Base; Using The Directory; Storing A Name And Number - Radio Shack TAD-728 Owner's Manual

43-728.fm Page 19 Thursday, August 26, 1999 8:53 AM
Paging from the
Base to the Handset
To send a page from the base to the
handset, press
INTERCOM
The handset beeps twice per second for
15 seconds. The handset's display
shows Paging . The base's IN USE/
CHARGE indicator flashes.
To answer a page at the handset, press
. Begin your conversation af-
INTERCOM
ter the handset display shows
com .
To end an intercom call, press
on the base or handset. All indica-
COM
tors turn off.
Paging from the
Handset to the Base
To send a page from the handset to the
base, press
INTERCOM
The base sounds two short beeps, and
automatically answers the handset's
page (whether or not anyone is there).
Begin your conversation.
To end an intercom call, press
COM
tors turn off.
on the base.

USING THE DIRECTORY

The TAD-728's directory stores up to 30
telephone numbers with a maximum of
16 digits for each number (including
pauses) into its memory. You can attach
a name (up to 16 characters) to stored
phone numbers.

Storing a Name and Number

Notes:
Inter-
INTER-
1. Lift the handset.
2. Hold down
on the handset.
on the base or handset. All indica-
• An error tone sounds and the phone
exits the storing process if you wait
more than 30 seconds between
each key press.
• If you receive a call during memory
entry, the phone exits the storing
process.
DIRECTORY
set until
Enter name
If you do not want to enter a name,
skip to Step 4.
INTER-
on the hand-
appears.
19