Table of Contents
Advertisement
43-728.fm Page 10 Thursday, August 26, 1999 8:53 AM
INSTALLATION
MOUNTING THE PHONE
You can place the TAD-728's base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the hand-
set's range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: You must use a Class
!
2 power source that supplies 9
volts DC and delivers at least
500 mA. Its center tip must be set to
negative and its plug must fit the TAD-
728's
DC 9V AC ADAPTER
plied adapter meets these specifica-
tions. Using an adapter that does not
meet these specifications could damage
the TAD-728 or the adapter.
The supplied RadioShack adapter was
designed specifically for your TAD-728.
Use only the supplied adapter.
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
10
• The USOC number of the jack to be
On a Desk
Follow these steps when you place the
base on a desk or table.
1. Plug one end of the supplied long
jack. The sup-
2. Plug the modular cord's other end
jack, you can update the wiring
yourself, using jacks and adapters
available
from
your
dioShack store. Or, you can let the
telephone company update the wir-
ing for you.
installed is RJ11C, or RJ11W for a
wall plate jack.
modular cord into the
on the back of the base.
into a modular phone line jack.
local
Ra-
jack
TEL LINE
Advertisement
Table of Contents
