Introduction; Installation - Radio Shack 43-3536 Owner's Manual

2.4 ghz cordless telephone with headset jack
Table of Contents

Advertisement

#
#
"+/2146#06"
• Cordless phones such as this
one require AC power to
operate. When the power is off,
you cannot make or receive
calls using your phone. To be
safe, you should also have a
phone that does not need AC
power to operate (not a cord-
less phone), so you can still
make and receive calls if there
is an AC power failure.
• When AC power is lost, the
phone loses the security
access-protection code con-
nection between the base and
the handset. When power is
restored, put the handset on
the base briefly to restore this
connection so you can use the
handset.
• Your phone operates on
standard radio frequencies as
allocated by the FCC. It is
possible for other radio units
operating nearby on similar
frequencies to unintentionally
intercept your conversation or
cause interference. This
possible lack of privacy can
occur with any cordless phone.
.
.
"%#76+10"
You must use a Class
!
2 power source that
supplies 9V DC and
delivers at least 210 mA. Its
center tip must be set to
positive and its plug must fit the
phone's DC IN 9V jack. The
supplied adapter meets these
specifications. Using an adapter
that does not meet these
specifications could damage the
phone or the adapter.
• Always connect the AC adapter
to the phone before you
connect it to AC power. When
you finish, disconnect the
adapter from AC power before
you disconnect it from the
phone.
4
3. Do not open or mutilate the battery pack. Released
electrolyte is corrosive and may cause damage to the
eyes or skin. It may be toxic if swallowed.
4. Exercise care in handling the battery pack in order not
to short it with conducting materials such as rings,
bracelets, and keys. The battery or conductor may
overheat and cause burns.
5. Charge the battery pack provided or identified for use
with this product only in accordance with the
instructions and limitations specified in the instruction
manual provided for this product.
6. Observe proper polarity orientation between the battery
pack and battery charger.
5#8'"6*'5'"
+05647%6+105
+0641&7%6+10
Thank you for purchasing a RadioShack 2.4 GHz Cordless
Telephone. Your phone uses the 2.4 GHz band for less
interference and greater range than many other cordless
telephones. Its headset jack lets you connect an optional
headset for hands-free convenience.
+056#..#6+10
You can place the phone on a desk or table, or mount it on a
standard wall plate or directly on a wall. Select a location
that is:
• near an accessible AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery, electrical appliances,
metal walls or filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the handset's range. If you have
a choice of several locations, try each to see which provides
. . . .
the best performance.
#"

Advertisement

Table of Contents
loading

Table of Contents