Ubee EVW32C Subscriber User Manual page 78

Advanced wireless voice gateway
Table of Contents

Advertisement

Ubee Interactive
Label
Address group
type
Subnet
Mask
Identity type
Identity
Remote endpoint settings
Address group
type
Subnet
Mask
Identity type
Identity
Network address
type
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
Configures the local network that will be protected by the IPsec VPN located on your device's
LAN side. Choose the local address type:
IP Subnet, to protect the whole subnet (default setting).
Single IP address, to protect a single PC.
IP address range, to protect several PCs.
Defines the subnet.
Defines the subnet mask.
Defines the identity type for this device:
Automatically use WAN IP address
IP address (default setting)
Fully qualified domain name (FQDN)
Email address (USER FQDN)
In Main mode (see
IKE negotiation mode on page
encrypted to provide identity protection. The VPN concentrator can distinguish up to 30 different
incoming SAs that have dynamic WAN IP addresses and connect from remote IPsec routers.
You can select between five encryption algorithms (DES, 3DES, AES-128, AES-192 and AES-
256), two authentication algorithms (MD5 and SHA1) and three key groups (DH1 and DH2,
DH5) when you configure a VPN rule. The identity type and content act as an extra level of
identification for incoming SAs.
In Aggressive mode (see
incoming SAs by identity type and content (which are not encrypted) to distinguish between
multiple rules for SAs that connect from remote IPsec routers that have dynamic WAN IP
addresses.
Defines the value corresponding to the selected Identity type.
Defines the address group type:
IP Subnet – protects the entire subnet.
Single IP address – protects a single PC.
IP address range – protects several PCs.
Defines the subnet.
Defines the subnet mask.
Defines the identity type to identity this device by:
Automatically use WAN IP address
IP address
Fully qualified domain name (FQDN)
Email address (USER FQDN)
Defines the value corresponding to the selected identity type.
Defines the network address type:
IP address, usually suitable for static public IP address (default setting).
Fully Qualified Domain Name (FQDN), usually suitable for dynamic public IP address.
Description
75), the identity type and content are
IKE negotiation mode on page
Using the VPN Option
75), the VPN concentrator identifies
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents