Ubee EVW32C Subscriber User Manual page 36

Ubee Interactive
Label
Graph
HIDE/VIEW
Button
Main Control
Settings
Status
Monitor
The following screen shot shows the analyzer running.
Ubee EVW32C Advanced Wireless Voice Gateway Subscriber User Manual • March 2017
This section is the main spectrum analyzer plot, which is where the data is displayed.
Click HIDE to shrink the right hand side controls and expand the graph to full width.
Click VIEW to show the right hand side controls.
This section contains the main buttons to start/stop the spectrum analyzer and to reset the
setting back to the default settings.

PRESET: Resets all the settings back to default values.

HOLD: Stops the spectrum analyzer from running.

RUN: Starts the spectrum analyzer.
This section contains all the supported settings for adjusting the plot or enabling features.

FREQUENCY: Specifies the frequency (center, start, or stop) to monitor in terms of
Hz.

SPAN: Specifies how wide of a span to view in terms of Hz.

AMPLITUDE: Sets the reference level (offset) of the input signal.

BW: Bandwidth

MEASUREMENTS:
This section contains all the fields for supported measurements and current settings.

CENTER

SPAN

REF LEVEL: Reference level

VID AVG: Enable/Disable video averaging

CHANNEL POWER: Specifies the span of the channel relative to the center frequency
to measure power over.
Description
Using the Diagnostic Option
31