On A Wall Plate Or Wall - Radio Shack ET-1118 Owner's Manual

4. Route the adapter's cord through
the strain relief slot on the bottom of
the base.
RING VOL
OF F-LO-HI
5. Plug the adapter into a standard AC
outlet.
6. Lift the base's antenna to a vertical
position.

On a Wall Plate or Wall

1. Insert the two tabs at the top of the
narrow end of the supplied bracket
into the base's upper tab slots as
shown, then press down on the
bracket's latches and insert them
into the lower slots.
RING VOL
OF F- LO-HI
8
2. Plug one end of the supplied short
modular cord into the
on the back of the base.
3. Insert the supplied AC adapter's
barrel plug into the
4. Route the adapter and modular
cords through the grooves on the
bracket.
RING VOL
OF F- LO-HI
jack
TEL LINE
jack.
DC IN 9V