Installation; Mounting The Phone; On A Desk Top - Radio Shack ET-1118 Owner's Manual

INSTALLATION

MOUNTING THE PHONE

You can place the ET-1118's base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a modular telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base's location affects the phone's
range. If you have a choice of several lo-
cations, try each to see which provides
the best performance.
Cautions:
You must use a Class 2
!
power source that supplies
9 volts AC and delivers at
least 500 mA. Its center tip must be
set to positive and its plug must fit
the ET-1118's
DC IN 9V
supplied adapter meets these speci-
fications. Using an adapter that
does not meet these specifications
could damage the ET-1118 or the
adapter.
• Always connect the AC adapter to
the ET-1118 before you connect it to
AC power. When you finish, discon-
nect the adapter from AC power be-
fore you disconnect it from the ET-
1118.
Notes:
• Your telephone connects directly to
a modular telephone line jack. If
your phone line jack is not a modu-
lar jack, you can update the wiring
yourself, using jacks and adapters
available at your local RadioShack
store. Or, you can let the phone
company update the wiring for you.
• The USOC number of the jack to be
installed is RJ11C (RJ11W for a wall
plate).

On a Desk Top

1. Plug one end of the supplied long
modular cord into the
on the back of the base.
2. Plug the modular cord's other end
into a modular telephone line jack.
jack. The
3. Insert the supplied AC adapter's
barrel plug into the
the back of the base.
jack
TEL LINE
jack on
DC IN 9V
7