Using Mute; Using Flash; Using Tone Services On A Pulse Line - Radio Shack ET-927 Owner's Manual

43-1097a.fm Page 15 Tuesday, August 31, 1999 10:01 PM

USING MUTE

The button on the handset lets
MUTE
you talk to someone else in the room
without the person on the other end of
the phone line hearing your conversa-
tion. Press during the call. The
MUTE
BATT LOW indicator on the handset
lights steadily.
Illus
Press again to resume your
MUTE
phone conversation. The BATT LOW in-
dicator turns off.

USING FLASH

You can use
FLASH
produce a switchhook signal for special
phone services, such as Call Waiting. If
you have Call Waiting, press
take an incoming call without discon-
necting the current call. Press
again to return to the first call.
illus -- make sure all
button labels are visible
Note: If you do not have any special
phone services, pressing
disconnect the current call.
on the handset to
to
FLASH
FLASH
might
FLASH
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these services.
With set to , just press
T/P P
you want to begin sending tones. Any
additional numbers you dial are sent as
tone signals. When you hang up, the
phone automatically resets to the pulse
mode.
illus
when
15