Advertisement
3.2 Operation – with mobile telephone
If your headset is in its base, press the release headset button to free the headset before
using it.
Turning headset ON:
Open the headset boom arm. The headset indicator will light for 2 seconds, and then
continue to fl ash slowly as long as the headset is on.
Turning headset OFF:
Close the headset boom arm. The headset indicator will light for 2 seconds, after which
it will turn off.
Making calls:
1. Open the headset boom arm and place the headset on the ear.
2. Dial the desired number on your mobile, and press the mobile's
Yes/Send/Call button to begin calling.
The headset indicator will fl ash rapidly for the duration of the call.
Making voice-activated calls:
Note: Before making voice-activated calls, voice dialling must be activated on your
mobile phone and voice tags stored. Consult your mobile phone's user guide for
full details.
To make voice-activated calls:
1. Open the headset boom arm and place the headset on the ear.
2. Press the Multifunction Button on the headset for 3 seconds. The headset will go
into voice command mode, and an audible tone will be heard indicating that the
headset is expecting a voice command.
12
GN6110_contents_EU_21-10-03.indd 12-13
3. Give the desired voice command.
The headset indicator will fl ash rapidly for the duration of the call.
Answering calls:
1. Press the Multifunction Button on the headset, or open the headset boom arm if not
already opened.
The connection will be established shortly.
2. An audible tone will be heard, and you are now connected to your caller.
The headset indicator will fl ash rapidly for the duration of the call.
Ending calls:
Press the Multifunction Button on the headset. An audible tone will be heard.
The call will also terminate if the mobile phone's End Call button/functionality is used,
or if the second party hangs up.
Headset
mobile phone switching (while on a call).
To switch from using the headset to mobile phone
during a call:
1. Terminate the link between the headset and the
mobile phone by closing the headset boom arm
[A]
Note: do not press the Multifunction Button.
2. The mobile phone will prompt you to continue
the call [B].
B
A
13
23-10-2003, 09:39:23
Advertisement
