Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Jabra Manuals
  4. Headsets
  5. GN 6210
  6. Troubleshooting

Jabra GN 6210 Troubleshooting

Gn netcom gn 6210: frequently asked questions
Hide thumbs Also See for GN 6210:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: User Manual
GN 6210 Troubleshooting
®
GN 6210 - Bluetooth
Wireless Headset for use in the
office, at home or even on the move
USE WITH MOBILE PHONES AND PAIRING
Does the GN 6210 work the same way with all Bluetooth-enabled
mobile phones?
Mobile phones are produced by many manufacturers and come in a very wide
range of makes and models. While the GN 6210 is compatible with them, there
may be slight variances with setting up and using your GN 6210 with your
specific mobile phone. For example, procedures for pairing your headset to
your mobile phone and the pairing profile used by your mobile can vary
depending on the mobile phone type.
On some mobile phones, you may have to delete former unused pairings in
order to pair with the GN 6210.
See the GN 6210 Pairing Guide for mobile phone-specific pairing instructions,
which is posted at www.gnnetcom.com/gn6210/support/.
Pairing my GN 6210 with my mobile phone was unsuccessful, what
should I do?
If your headset doesn't work with or works poorly with your mobile phone,
delete any existing GN 6210 pairing and check the compatibility chart from the
Pairing Guide, which is posted at www.gnnetcom.com/gn6210/support/.
When pairing the headset to a mobile phone, remember to either disconnect
the power supply to the base unit or ensure the headset is at least 10 m (30
ft.) away from the base.
My headset's pairing to the base has been lost or doesn't seem to work
properly, what should I do?
You may need to reset both your base unit and headset. To reset your base,
use a pointed object (such as an unfolded paperclip) to press the base's reset
button (on bottom of base unit) for 2 seconds. To reset the headset, press and
hold the headset's volume down button and then simultaneously press the
headset's Multifunction button down for 5 seconds.
To use my headset at home as well as in the office, can I pair my
headset to several bases?
Yes, you can use the same headset on up to 2 base units. For example, you
may have one base unit at the office and another at home.

Advertisement

loading

Related Manuals for Jabra GN 6210

Summary of Contents for Jabra GN 6210

  • Page 1 Mobile phones are produced by many manufacturers and come in a very wide range of makes and models. While the GN 6210 is compatible with them, there may be slight variances with setting up and using your GN 6210 with your specific mobile phone.
  • Page 2 Lifter, which attaches to the GN 6210 base and the desk phone. When the GN 1000 RHL is used with the GN 6210, the headset gives you one ring tone when the call is from the desk phone and a different tone when the call is from the mobile phone, so you will always know which phone you are answering.

  • Page 3: Everyday Use

    My automatic voice dialing feature does not always recognize my voice commands, what can I do? When initially saving your voice tags/commands to your mobile phone’s memory, it is best to use the GN 6210. This will result in optimal recognizing of your voice commands. EVERYDAY USE Does the GN 6210 also work with analog phones? Absolutely.
  • Page 4 MiniGel How long is the battery charge time? The initial full charge of the GN 6210 is approximately 2 hours. It is important that the unit is not used before the initial, full charge. After its initial charge, the headset will take up to 2 hours to recharge fully, depending on its current charge levels.
  • Page 5 Press the Multifunction button again for 1 second to end a call. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom is under license. Other trademarks and trade names are those of their respective owners.