Radio Shack TAD-705 Owner's Manual page 20

43-705.fm Page 20 Tuesday, May 23, 2000 8:54 AM
Press
02
21
22
31
32
4
5 —The TAD says "Erase,"
then press 1
5 —The TAD says "Erase,"
then press 2
6
7
81
82
91
92
After pressing , , , or
21 22 31
Press
1
Replay the previous Caller ID record or message.
3
Skip to the next Caller ID record or message.
4
Replay the current Caller ID record or message.
5
Delete the current Caller ID record or message.
6
Stop message playback.
20
Set the TAD to announce only. It beeps, says "Announce only," plays
OGM 2, then beeps. If no OGM 2 is recorded, it beeps and says "You
have no announcement two."
Play all messages. If there are no messages, the TAD says "You have
no messages."
Announce all Caller ID records. The TAD announces the total calls
and each caller's information. If there are no Caller ID records, the
TAD says "You have no calls." If the Caller ID record is deleted but its
accompanied message is not deleted, the TAD says "deleted" after
announcing that Caller ID record's number.
Play new messages. The TAD announces the number of new mes-
sages before playback. If there are no new messages, the TAD says
"You have no new messages."
Announce new Caller ID information. If there are no new Caller ID
calls, the TAD says "You have no new calls." If you get a private call or
out of area call, the TAD says "unknown number" after announcing
Caller ID number and time.
Monitor the room for 20 seconds. Press 4 to repeat monitoring.
Delete all messages (except new messages).
Delete all Caller ID calls (except new Caller ID calls).
Stop playback or recording.
Record a memo.
Change OGM 1. After the TAD beeps, begin speaking. When you fin-
ish, press 6. The TAD beeps and plays the new OGM 1.
Play OGM 1. If no OGM 1 has been recorded, the TAD announces
"You have no announcement one."
Change OGM 2. After the TAD beeps, begin speaking. When you fin-
ish, press 6. The TAD beeps and plays the new OGM 2.
Play OGM 2. If no OGM 2 has been recorded, the TAD announces
"You have no announcement two."
to play Caller ID records/messages remotely, you can
32
TAD Operation
To
To