Viewfinder Playback - Radio Shack 16-830 Owner's Manual

16-830.fm Page 9 Wednesday, July 21, 1999 9:32 AM
Notes:
• To protect the tape and conserve battery
power, the camcorder turns itself off if you
pause the tape for more than 5 minutes. To
turn the camcorder back on, press
.
PAUSE
• For more information about recording with
your camcorder, be sure to read all the sec-
tions under "Special Video Recording Fea-
tures" on Page 18.

VIEWFINDER PLAYBACK

After you make a recording, you can play it back
through the viewfinder. (Of course, you can also
press , remove the tape, and play it
STOP/EJECT
in any VHS VCR).
1. Slide POWER
tor lights.
2. Press
REWIND
beginning or to the place where you want to
begin playback. See "Digital Counter" on
REC/
Page 21.
3. Press and watch the picture in the
PLAY
viewfinder. See "Special VCR Features" on
Page 26.
Note: You cannot hear the tape's audio
recording during viewfinder playback. To
hear sound, play the tape through a TV/
monitor or on a VCR. See "Connecting the
Camcorder to a TV" on Page 32.
4. Press STOP/EJECT
5. To remove the cassette, press
again.
Note: Except when you are recording, you
can eject a cassette any time power is con-
nected to the camcorder, whether or not the
POWER indicator is lighted.
to VCR . The POWER indica-
to return the tape to the
to end playback.
STOP/EJECT
9