Editing Titles; Adding Titles While Recording - Radio Shack 16-830 Owner's Manual

16-830.fm Page 23 Wednesday, July 21, 1999 9:32 AM
The characters appear in this order as you
press (or in reverse order as you press
+
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z 0 1 2 3 4 5 6 7 8 9? '. /, -;: < >!
(space)
5. After you have selected the first character,
press to move the flashing cursor to
SHIFT
the place where you want the next charac-
ter.
6. Repeat Steps 4 and 5 until you complete
the title.
Note: The last character you select might
flash in the viewfinder, but it will not flash
when you save it.
7. If you like, you can press
Steps 3-6 to create another title.
8. To save and review the titles you created,
press . The last title page you created
TITLE
appears, and the first character of the title
flashes. To view the other title page (if you
created one), press
Notes:
• Your camcorder's built-in rechargeable bat-
tery protects the titles you created (see
"Selecting a Power Source" on Page 12).
• The camcorder saves the titles you created
when it automatically stops and turns itself
off after 5 minutes.
).
–
then repeat
PAGE
REVIEW DISPLAY RESET DATE TITLE CAM OFF VIDEO DUBBING REW PLAY F.FWD STOP
/TIME AUDIO/VIDEO
POWER - PAGE + SH
.
PAGE

Editing Titles

Follow these steps to change a title.
1. Press . Then, if the title page you
TITLE
want to correct does not appear, press
to select the other title page.
PAGE
2. Repeatedly press
SHIFT
through the characters until the incorrect
character flashes.
3. Repeatedly press or
–
or forward through the characters until the
viewfinder shows the correct character. To
quickly move backward or forward through
the characters, press and hold down
4. If necessary, repeat Steps 2 and 3 to select
and correct other characters.

Adding Titles While Recording

You can use the camcorder to superimpose
(add) titles to your recordings while you record.
Note: You cannot use these steps to superim-
pose titles over material previously recorded.
You can do this while you dub a tape. See "Add-
ing Titles onto an Existing Recording" on Page
31.
1. Slide to .
POWER VCR
2. Locate the position on the tape where you
want to record a title.
3. Slide to
POWER CAMERA
4. Press . Then, if the title page you
TITLE
want to record does not appear, press
to select the other title page.
PAGE
5. Press to start the title record-
REC/PAUSE
ing.
The camcorder superimposes the title you
selected over the scene you are recording.
6. When you want to stop recording the title
onto the tape, press
TITLE
pears.
to move forward
to move backward
+
or .
– +
.
. The title disap-
23