Table of Contents
Advertisement
16-830.fm Page 29 Wednesday, July 21, 1999 9:32 AM
4. Set
inside the
AV OUT/IN
jack compartment to
OUT/IN
5. Slide
to
.
POWER
VCR
6. Insert a cassette into the camcorder.
7. Set your VCR to its audio/video mode.
Note: Some VCRs have a manual input-
select switch, while others automatically
"sense" when you connect another audio/
video source to the VCR's audio/video
input jacks. Check your VCR's owner's
manual for more information about your
VCR.
8. Press
on the camcorder to find the
PLAY
portion of the tape you want to dub. Then
press
to pause it.
REC/PAUSE
9. Set the VCR to record, then press the
VCR's record button to begin recording.
10. Press
on the camcorder to play
REC/PAUSE
the portion of the tape you want to dub.
11. Press
on the camcorder to stop
REC/PAUSE
dubbing.
Adding Titles onto an Existing
Recording
Note: You need a separate VHS VCR to super-
impose titles over an existing recording.
1. Connect the camcorder and VCR (see
"Dubbing from the Camcorder" on Page
28.).
2. Press
to select the title you want to
TITLE
record. Then, if the title you want to record
does not appear, press
other title page.
3. Press
to remove the title from the
TITLE
viewfinder. The title disappears.
4. Load a blank cassette, or one you want to
record onto, into the VCR. Then set the
VCR to its recording mode.
5. Load the cassette you want to record from
into the camcorder, then press
it back.
29
6. When you see the scene where you want to
AUDIO/VIDEO
.
OUT
7. When you want to stop recording the title
AUDIO EDITING
The camcorder's audio editing feature lets you
record a new soundtrack onto a previously re-
corded tape without erasing the original picture.
When you use audio editing, you replace the au-
dio on the tape with new sound. You can use
sounds picked up by the camcorder's built-in mi-
crophone or signals from an audio source con-
nected to the camcorder's
Notes:
• If you connect an audio source, always use
• Do not use a standard audio cable for this
1. If you are not using the camcorder's built-in
to select the
PAGE
to play
PLAY
record the title, press
TITLE
corder plays the title and superimposes it
over the recording.
onto the tape, press
TITLE
pears.
AUDIO
video quality shielded cables with phono-
type connectors (such as Cat. No. 15-1540,
not supplied) to connect the camcorder's
jack to the audio source's AUDIO
AUDIO
OUT jack.
connection.
microphone as an audio source, connect
the audio source's AUDIO OUT jack to the
camcorder's
jack.
AUDIO
. The cam-
. The title disap-
jack.
Advertisement
Table of Contents
