16-830.fm Page 14 Wednesday, July 21, 1999 9:32 AM
PREPARING THE CAMCORDER FOR USE
INSERTING/REMOVING A
VIDEO CASSETTE
You can open the cassette compartment to in-
sert/remove a video cassette whenever a power
source is connected to the camcorder, whether
or not the camcorder is turned on.
1. Press
to open the cassette
STOP/EJECT
compartment.
2. Insert a VHS cassette into the cassette
compartment with the side label facing you
and the spine label facing up, then gently
press the cassette compartment door until
it closes.
Caution: Never insert anything except a
VHS video cassette into the cassette com-
partment.
To remove a cassette, press
for the cassette compartment door to open, and
pull out the cassette.
Caution: Always remove the cassette before
storing the camcorder.
14
SETTING THE POWER SWITCH
While pressing and holding down the red button
in the center of
video recording or to
POWER indicator lights.
Slide
PREPARING/ADJUSTING THE
VIEWFINDER
The camcorder's viewfinder is set to this posi-
tion at the factory.
, wait
STOP/EJECT
Before you carry the camcorder by its shoulder
strap or store it, return the viewfinder to this po-
sition (see "Setup" on Page 17).
, slide it to
POWER
for playback. The
VCR
to
to turn off the camcorder.
POWER
OFF
for
CAMERA
CAM
OFF
VIDEO
POWER