Table of Contents
Advertisement
16-830.fm Page 11 Wednesday, July 21, 1999 9:32 AM
Attaching the Battery Pack to the
Camcorder
Alignment Marks
1. Align the marks on both sides of the battery
pack with the marks on the sides of the
camcorder.
2. Gently press the battery pack against the
camcorder, then slide the battery pack
down until it clicks and locks in place.
Caution: The battery pack fits only one
way onto the camcorder. Do not force it.
Removing the Battery Pack
from the Camcorder
BATTERY
1. Slide
to
POWER
OFF
corder.
2. While pressing and holding down
slide the battery pack up to remove it.
Caution: Always stop the tape and turn off
the camcorder before you remove the bat-
Battery Status Indicators
When the battery pack is fully charged,
appears in the viewfinder when you slide
ER
As the battery's power is used,
the viewfinder. When the battery is low,
blinks in the viewfinder. Then, after a few sec-
onds, the camcorder turns itself off. Recharge
the battery pack or power the camcorder from
the supplied AC adapter/charger or an optional
DC adapter.
Note: You can order additional battery packs
from your local Radio Shack store so you can
use one battery while you charge another.
Replacing the Battery Pack
While Recording
You can replace the battery pack with a fresh
one while recording.
1. If
2. If the camcorder is still on, slide
3. Remove the old battery pack and attach a
to turn off the cam-
4. Slide
,
BATTERY
5. Press
tery pack. You might damage the tape if
you remove the battery pack during record-
ing or playback.
0
0
12
4
3
50
to
.
CAMERA
flashes in the viewfinder during
recording,
press
REC/PAUSE
recording.
. The POWER indicator turns off.
OFF
Caution: Be sure the POWER indicator is
off before you remove the battery pack.
fresh one.
to
POWER
CAMERA
indicator turns on.
to continue recording
REC/PAUSE
from the same place as before.
9
8
50
POW-
appears in
to
stop
to
POWER
. The POWER
11
Advertisement
Table of Contents
