Audio/Video Editing - Radio Shack 16-830 Owner's Manual

Radio shack camcorder user manual
Table of Contents

Advertisement

16-830.fm Page 30 Wednesday, July 21, 1999 9:32 AM
2. Set
inside the
AV OUT/IN
jack compartment for the audio
OUT/IN
source you chose:
IN
OUT
• If you are using the built-in microphone,
set
to
AV OUT/IN
OUT
• If you are using an audio source con-
nected to the camcorder's
set
to
.
AV OUT/IN
IN
3. Slide
to
.
POWER
VCR
4. Insert a cassette into the camcorder.
5. Press
on the camcorder to find the
PLAY
portion of the tape where you want to start
audio dubbing. Then press
pause it.
6. Press
and
PLAY
DUBBING AUDIO/VIDEO
together once.
viewfinder.
Note: If
does not appear in the
viewfinder, press
STOP/EJECT
and
PLAY
DUBBING AUDIO/VIDEO
once to continue.
7. If you are not using the camcorder's built-in
microphone as an audio source, start the
audio source.
8. To start audio dubbing, press
on the camcorder.
9. Press
on the camcorder to
STOP/EJECT
stop dubbing.
Notes:
• To set the position where you want to end
audio dubbing, start playback of the tape,
press
on the camcorder at the
DISPLAY
30
AUDIO/VIDEO
• To prevent feedback squeals, turn down the

AUDIO/VIDEO EDITING

When you use audio/video editing, you can re-
place the audio and video on a tape with new
sound and pictures.
You can use sounds picked up by the camcord-
.
er's built-in microphone or signals from an audio
source connected to the camcorder's
jack. You can use pictures taken by the camera
jack,
AUDIO
or signals from a video source connected to the
camcorder's
Notes:
• If you connect an audio/video source,
to
REC/PAUSE
appears in the
• Do not use standard audio cables for this
, then press
1. If you are not using the camcorder's built-in
together
2. Set
REC/PAUSE
3. Slide
point where you want to end audio, then
start the dubbing process.
volume control on any TV or TV/monitor
connected to the camcorder.
jack.
VIDEO
always use video quality shielded cables
with phono-type connectors (such as Cat.
No. 15-1540, not supplied) to connect the
camcorder's
and
AUDIO
VIDEO
source's AUDIO OUT and VIDEO OUT
jacks.
connection.
microphone as an audio source, connect
the audio source's AUDIO jack to the cam-
corder's
jack.
AUDIO
inside the
AV OUT/IN
jack compartment for the video
OUT/IN
source you chose.
• If you are using the camcorder's lens, set
to
.
AV OUT/IN
OUT
• If you are using a video source con-
nected to the camcorder's
set
to
.
AV OUT/IN
IN
to
.
POWER
VCR
AUDIO
jacks to the
AUDIO/VIDEO
jack,
VIDEO

Advertisement

Table of Contents
loading

This manual is also suitable for:

130 moviecorder

Table of Contents