Remote Control Operation; Remote Operation Through A Tone Telephone; Remote Access Codes; Changing Of The Remote Access Code - BellSouth GH9492 Owner's Manual Installation And Operating Instructions

Remote Control Operation

Remote Operation through a Tone Telephone

You can use many Answering System features when you are away from home. To protect your
privacy, most of the features can be used only after you enter the three-digit Remote Access
Code.

Remote Access Codes

The Remote Access Codes are preset at the factory as below. You can use the preset codes or
choose your own.
PRIMARY MAILBOX:
MAILBOX 1:
MAILBOX 2:
MAILBOX 3:
MAILBOX 4:
NOTE: If there is a power failure of the BASE UNIT, the Remote Access Codes return to the
factory preset codes.
Changing of the Remote Access Codes
All of the digits of the Remote Access Codes are a combination of the numbers 5, 6, 7, 8, 9, and
0.
IMPORTANT: Digits 1, 2, 3, and 4 cannot be used when changing the Remote Access Codes
for any mailbox (including the PRIMARY MAILBOX).
1. Press a mailbox button for MAILBOX 1, 2, 3, or 4. For the PRIMARY MAILBOX, follow
steps 2 to 6.
2. Press and hold down the
enter new password.
3. Press and hold down the
first digit of the code.
4. Press and hold down the
second digit of the code.
5. Press and hold down the
third digit of the code.
code
6. Press the button, the 3-digits you have selected will be announced.
7. If your new Remote Access Code is the same as that of another mailbox, the Answering
System will not record your password and will announce, Please try again.
999
555
666
777
888
code
button until you hear the announcement, Please
button. Release the button when you hear the desired
button. Release the button when you hear the desired
min
button. Release the button when you hear the desired
35