Viewing The Caller List; Placing A Call From The Caller List; Editing The Caller List Before Dialing - BellSouth GH9492 Owner's Manual Installation And Operating Instructions

Caller ID System Operation

Viewing the Caller List

1. Press the SCROLL DOWN
SCROLLUP button to view the first Caller ID record, press the SHIFTRIGHT
button if the name has more than 11 characters.
MICHAEL BROW
6 0 4 - 5 5 5 - 1 2 1 2
10:00 AM
2. Press the button to return to STANDBY mode. (If no active buttons are pressed
for 20 seconds or you have viewed the last Caller ID record in the Caller ' s List, the LCD
Screen will automatically return to STANDBY mode.)

Placing a Call from the Caller List

1. With the HANDSET in STANDBY mode, press the SCROLLDOWN
from the latest Caller ID record, or press the SCROLLUP
first Caller ID record.
2. Press and hold down the DIAL 7
button for a local call with area code, or the DIAL1+
3. To end your conversation, either press the
BASE UNIT.
To place a call from the Caller List while in TALK mode, press the
follow steps 1 through 3.
NOTE: You can edit the number before dialing, but you can not SAVE any changes in the
Caller List.

Editing the Caller List before Dialing

1. Press the SCROLL UP
2. Press the edit button.
3. Move the cursor by pressing the SHIFTLEFT
want to change. To erase digits, press the
theTELEPHONE KEYPAD
4. Press and hold down the DIAL 7
for a local call with area code, or the DIAL 1 +
5. To end your conversation, either press the
BASE UNIT.
To save the edited record from the Caller List, follow steps 1 through 3 then press and hold
down the button.
redial
save/pause
button to view the latest Caller ID record, or press the
BROWING
6 0 4 - 5 5 5 - 1 2 1 2
#
8/24 1 10:00 AM 8/24
NEW
button for a local call, or the DIAL 10
talk
button or place the HANDSET on the
or DOWN button to find the Caller ID record.
or RIGHT
~ buttons.
button for a local call, the DIAL10
1+ #
talk
button or place the HANDSET on the
16
#
1
NEW
button to select
button to select from the
1+ button for a long distance call.
#
talk
button, then
button to the digit you
delete
button. To add digits, use
scan
button for a long distance call.
button