Remote Operation Through A Tone Telephone; Remote Access Codes; Changing Of The Remote Access Codes - BellSouth GH9486 Owner's Manual

Answering System Operation

Remote Operation through a Tone Telephone

You can use many Answering System features when you are away from home. To
protect your privacy, most of the features can be used only after you enter the three-digit
Remote Access Code.

Remote Access Codes

The Remote Access Codes are preset at the factory as shown below. You can use the
preset codes or choose your own.
PRIMARY MAILBOX:
MAILBOX 1:
MAILBOX 2:
MAILBOX 3:
MAILBOX 4:
NOTE: If the RESET button is pressed, the Remote Access Codes return to the factory
preset codes.

Changing of the Remote Access Codes

All of the digits of the Remote Access Codes are a combination of numbers 5, 6, 7, 8,
9, 0.
IMPORTANT: Digits 1, 2, 3, and 4 cannot be used when changing the Remote Access
Codes for any mailbox (including the PRIMARY MAILBOX).
1. Press a mailbox button for MAILBOX 1, 2, 3, or 4. For the PRIMARY MAILBOX,
follow steps 2 to 6.
2. Press and hold down the
"Please enter new password."
3. Press and hold down the
desired first digit of the code.
4. Press and hold down the
desired second digit of the code.
5. Press and hold down the
desired third digit of the code.
6. Press the button, the 3-digits you have selected will be announced.
7. If your new Remote Access Code is the same as that of another mailbox, the
Answering System will not record your new password.
999
555
666
777
888
button until you hear the announcement,
button. Release the button when you hear the
button. Release the button when you hear the
button. Release the button when you hear the
33