Changing The Battery Pack - BellSouth GH9492 Owner's Manual Installation And Operating Instructions

2.4 ghz cordless telephone with digital answering machine & caller id on call waiting 40 channel autoscan with 4 separate mailboxes

Table of Contents

Changing the BATTERY PACK

Changing the Battery Pack

The BATTERY PACK provides power for the HANDSET of your cordless telephone.

To Replace BATTERY PACK:

1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.

2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK.

3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.

4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed

position.

5. Before use, charge the new BATTERY PACK for 12 hours.

ATTENTION:

The telephone that you have purchased contains a rechargeable BATTERY PACK. The

BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws, it

may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check with

your local solid waste officials for details in your area for recycling options or proper disposal.

IMPORTANT

In order to get maximum life from the HANDSET

BATTERY PACK, be sure to charge the HANDSET for 12

hours before initial use.

Table of Contents