Speed Viewing The Directory; Saving In The Directory; Preferred Calls; Blocked Calls - BellSouth GH9492 Owner's Manual Installation And Operating Instructions

Caller ID System Operation

Speed Viewing the DIRECTORY

1. Press the button.
2. Enter the first letter of a name. (See Page 27 for detail of entering a letter.)
3. Press the SCROLLUP

Saving in the DIRECTORY

1. Press the button.
edit
2. Press the button.
3. Use the TELEPHONE KEYPAD
27 for detail) you can store up to 15 characters. To move the cursor to the right, create
a space, or to enter a new letter, press the SHIFT RIGHT
4. Press the SCROLLDOWN
5. Enter the telephone number using the TELEPHONE KEYPAD
You can store up to 16 digits.
6. Press and hold down the
7. Press the button to go back to STANDBY mode.
(If no active buttons are pressed for 20 seconds, the LCD Screen will automatically return
to STANDBY mode.)
NOTES: 1. It will not save a duplicate telephone number or a name without the
corresponding telephone number in the DIRECTORY.
2. To delete a character or number inside the cursor, press the

PREFERRED CALLS

You can assign stored numbers a PREFERRED CALL status which will generate a special
ringer sound at the start of the second ring to any welcome caller in the DIRECTORY.
When you are saving the name and number into the DIRECTOR Y, add a " # " symbol at the
beginning of the name by pressing the

BLOCKED CALLS

You can assign stored numbers a BLOCKED CALL status which will disable the ringer
sound after the second ring to any caller in the DIRECTORY.
When you are saving the name and number into the DIRECTORY, add an "
beginning of the name by pressing the 7
button to view all names with the same first letter.
~ buttons to enter the name, (see page
button once.
redial
button.
save/pause
button.
1+
#
button.
18
button.
~ buttons.
delete
button.
scan
" symbol at the
*