Redial Feature - BellSouth GH9492 Owner's Manual Installation And Operating Instructions

Cordless Telephone Operation

Redial Feature

1. If you get a busy tone, press the
place the HANDSET on the BASE UNIT to hang up.
2. Later, press the talk
3. Listen for a dial tone.
redial
4. Press the button. This will automatically
save/pause
redial the last telephone number you called in TALK
mode.
5. When you have finished with your call, press the
button again (the BASE UNIT IN USE LED
talk
indicator will turn off) or place the HANDSET on the
BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits " beep " sounds to warn you
that the background noise level is too high for proper communication between the HANDSET
and the BASE UNIT. When you hear this sound, you should move closer to the BASE UNIT to
reduce the noise level. Otherwise, the call will automatically cut off.
talk
button or
button again.
13