Deleting A Security Association - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
The Connection Monitor screen for this connection is shown below:
In this example:
• The FVS318 has a public IP WAN address of 134.177.100.11
• The FVS318 has a LAN IP address of 192.168.0.1
• The VPN client PC has a dynamically assigned address of 12.236.5.184
• The VPN client PC is using a "virtual fixed" IP address of 192.168.100.100
While the connection is being established, the Connection Name field in this menu will say "SA"
before the name of the connection. When the connection is successful, the "SA" will change to the
yellow key symbol shown in the illustration above.
Note: While your PC is connected to a remote LAN through a VPN, you might not have
normal Internet access. If this is the case, you will need to close the VPN connection in
order to have normal Internet access.

Deleting a Security Association

To delete a security association:
Log in to the firewall.
1.
Click on the VPN Settings link.
1.
In the VPN Settings Security Association table, select the radio button for the security
2.
association to be deleted.
Click on the Delete button.
3.
Click on the Update button.
4.
Virtual Private Networking
Figure 4-20: Connection Monitor screen
4-23