Si-tex Explorer Nav Pro User Manual page 9

position.
● [CYCLE]: cycles through pages.
● [SWITCH WHEEL FUNCTION]: changes the function of remote controller's wheel. It
has three functions on map: zoom in/out, rotate, tilt. The wheel selector can also be
used to navigate through menu items as with joystick.
● [COMPASS]: point with remote controller towards any direction around you and press
this button. You will see red dashed line on the map of chart plotter, showing the
pointed direction.
Compass Calibration
The remote controller's inner compass needs to be calibrated.
1. Simultaneously press BACK and COMPASS on the remote controller until you here
three beeps.
2. Release the buttons after you hear three beeps.
3. Start moving the remote controller slowly in a figure eight shape. The rotation must be
around three axes. It might take 1 minute for calibration to complete.
4. Stop rotation after you hear three beeps. Now the compass sensor is calibrated. If
you hear two beeps start compass calibration from the beginning.
Chart Plotter - User Manual
1
3
beeps
2
3
9