Ship Profile Settings - Si-tex Explorer Nav Pro User Manual

7. In case of "Custom" select "Brightness"
8. Press [ENTER]

14.5 Ship Profile Settings

It is important to enter correct information about your vessel's parameters on the Ship
Profile page.
1. Open General Settings page
2. Select "Ship Profile"
3. Press [ENTER]
● Ship type allows you choosing your boat's icon on the map.
● Safe depth, safe height, safe corridor information is used for check route function (see Par.
7.3).
● Fuel tank capacity information is used for detecting you fuel level on the Engine page.
NOTE In case the detected engine tank capacity differs from your ship profile data, you will
be notified to edit your Ship Profile
Chart Plotter - User Manual
Fig.14.5 – Ship Profile page
53