Si-tex Explorer Nav Pro User Manual page 60

On this page you can start/stop tracking of the selected AIS Target and locate it on the map.
By placing the cursor over an AIS Target icon on the map, the following information is
displayed: AIS name, SOG, COG, CPA and TCPA (see Fig. 17.1.2).
Open AIS full info page from the map:
1. Press [ENTER] on the AIS icon
2. Select "Full info"
3. Press [ENTER].
AIS Tracks
Each AIS Target within the display range can be tracked. The track of AIS Target can be saved
on the chart plotter to access any time later.
1. Open AIS page
2. Select the desired AIS target in the list of AIS targets
3. Press [ENTER]
4. Select "Start Tracking"
5. Press [ENTER]
All AIS tracks can be accessed in the "AIS Tracks" tab.
NOTE Target is removed from the screen and list of targets on the AIS page if data is not
received for 5 minutes.
60
Fig. 17.1.2 – AIS Target info box
Chart Plotter - User Manual