4. Select "Save event"
5. Press [ENTER].
7.1.2 Editing Mark's color, symbol, name and description
You can change a color, symbol, name and description of a single mark.
In Mark's list:
1. On map page press [MENU]
2. Open "Marks"
3. Select a mark in list and press [ENTER]
4. Select "Edit name and description" or "Edit color and symbol"
5. Press [ENTER].
On map:
1. Place cursor over mark
2. Press [ENTER]
3. In the contextual menu select "Name and description" or "Color and symbol"
4. Press [ENTER]
5. Introduce changes and press [ENTER] to save or [CLEAR] to exit without saving
changes.
7.1.3 Editing Mark's latitude and longitude position
In Mark's list:
1. Select the mark in the list of marks and press [ENTER]
2. Select "Edit position"
3. Input Lat/Lon
4. Press "OK" to save.
OR
5. "Cancel" to exit position editing.
On map:
1. Place cursor over mark
2. Press [ENTER]
3. In the contextual menu select "Move"
4. Press [ENTER]
5. Move cursor over map
6. Press [ENTER] to save new position.
Chart Plotter - User Manual
31