Remote Controller - Si-tex Explorer Nav Pro User Manual

2.3 Remote Controller

You can operate on the chart plotter using the optional remote controller. The remote controller
connects to chart plotter via radio signal and requires one AAA battery.
To connect the remote controller with the device:
1. On the Keyboard, press [ENTER] to open the Main Menu
2. Select "General Settings" and press [ENTER]
3. Enable connectivity with Remote Controller selecting "Remote Control" and pressing
[ENTER]
4. Select PIN and press [ENTER]
5. Input the correct PIN, which you can find on the backside of your remote controller
6. Press the remote controller joystick to activate it. On the status bar (left top) of the
page you will see the remote control icon. Now you can operate on chart plotter with
the remote controller from distance.
The battery status can be seen either on the Remote control page when remote controller is
connected, or in status bar (see par.4.1) when battery is low.
Back
Cycle
Mark/MOB
Remote controller buttons:
● [MENU]: same as chart plotter MENU.
● [BACK]: same as chart plotter CLEAR.
● [MARK]: short press puts Mark on map. Long press puts MOB on the current vessel's
8
Menu
Zoom
(Tilt, Rotate)
Switch
wheel function
Compass
Chart Plotter - User Manual