Table of Contents
Advertisement
•
Recording time limit for each message is 64 seconds,
no time limit per line or per extension
•
VM can only be enabled/disabled from the BU
•
Remote landline access to voice mailboxes
3. Handset (HS) Features:
a. Any key answer (except END and two Soft Keys)
b. Battery:
•
3.6 V Li-Ion
•
Battery strength display and low battery alert tone
c. Call Forwarding:
•
Forward all incoming calls to another handset or an
outside line after 3 rings to the extension
•
Once enabled from the handset, all phone calls will be
routed to the designated number until disabled. A
warning message will appear on the LCD
•
Intercom calls are not forwarded.
•
Before setting this feature, please check your PBX
system if it can send a line reverse signal to hang up
the line
d. Call Log:
•
Records last 50 incoming calls, up to 25 digits each
for telephone numbers and 16 characters each for
names (needs Caller ID service from telephone
service provider)
•
One-button access to Call Log during standby by
pressing the Right arrow key and then use Up/Down
arrow keys for scrolling
e. Call Transfer:
•
Direct Transfer: call transfer to another handset
without announcement
•
Announced Transfer: call transfer to another handset
with announcement
f.
Charger:
•
Separate charger, no need for wiring
•
4 hours charge from empty
g. Dialing Prefix: up to 14 digits, including pause(s), an
access code or credit card number can be pre-
programmed to be automatically added when dialing from
Call Log and Directory or when dialing by entering number
first
h. Directory:
27
•
100 alphabetically sorted and searchable names
•
Each entry can store up to 25-digit phone number and
16-character name
•
Can dial from display
•
During stand-by, you can enter the directory by
pressing the Left arrow key and then use Up/Down
keys for scrolling
i.
DND (Do Not Disturb): silent ring on all incoming calls
j.
Group Paging: enter group ID to page several extensions
k. Headset and Speakerphone
l.
Hold:
•
Can place up to 4 lines on hold
•
Can perform battery swap during hold
m. Intercom:
•
Handset-to-handset or handset-to-base Intercom
•
Handset-to-handset intercom is performed
independent of base
n. Key Guard: prevents accidental dialing
o. LCD:
•
4-line with call duration display
•
5-level LCD contrast adjustment
p. Line Selection: when enabled, handset can select from a
list of available lines for an outgoing call
q. Mute
r.
Redial: can perform last-number-redial on 10 previously
called numbers
s. Ringer vibrator
t.
Second Incoming Call: alert the arrival of another call on
another line
u. Sound Type Selections:
•
4 ringer types
•
4 key tone types
v.
Sound Volume Adjustments:
•
6-level voice volume
•
5-level ringer volume (high/low/vibrate/vibrate-then-
ring/off)
•
3-level key tone volume control (high/low/off)
w. Three-way Conferencing: supports 2-HS+1-line, 2-line+1-
HS, 1-HS+BU+1-line, BU+2-line three-way conferencing
x. 2.5 mm standard headset jack, auto-answer can be
enabled when operating with a headset
y. VM (Voice Mail) Message Alert
28
Advertisement
Table of Contents
