Table of Contents
Advertisement
RUGGEDCOM ROS
User Guide
Use the All option to select all ports in the device, or, if available, use the None option to select none of the
ports.
Section 2.8
Managing the Flash File System
The following section describes how to manage the flash file system.
CONTENTS
•
Section 2.8.1, "Viewing a List of Flash Files"
•
Section 2.8.2, "Viewing Flash File Details"
•
Section 2.8.3, "Defragmenting the Flash File System"
Section 2.8.1
Viewing a List of Flash Files
To view a list of files currently stored in Flash memory, do the following:
1.
Log in to the device as an admin user and access the CLI shell. For more information about accessing the CLI
shell, refer to
Section 2.6, "Using the Command Line Interface"
Type flashfiles. A list of files currently in Flash memory is displayed, along with their locations and the
2.
amount of memory they consume. For example:
>flashfiles
-----------------------------------------------------------------
Filename
-----------------------------------------------------------------
boot.bin
main.bin
fpga.xsvf
syslog.txt
ssh.keys
ssl.crt
banner.txt
crashlog.txt
config.bak
config.csv
factory.txt
-----------------------------------------------------------------
Section 2.8.2
Viewing Flash File Details
To view the details of a file currently stored in Flash memory, do the following:
1.
Log in to the device as an admin user and access the CLI shell. For more information about accessing the CLI
shell, refer to
Section 2.6, "Using the Command Line Interface"
2.
Display information about a file by typing:
Managing the Flash File System
Base
Size
Sectors
00000000 110000
0-16
00110000 140000
17-36
00250000 010000
37-37
00260000 140000
38-57
003A0000 010000
58-58
003B0000 010000
59-59
003C0000 010000
60-60
003D0000 010000
61-61
003E0000 010000
62-62
003F0000 008000
63-63
003FC000 004000
66-66
.
Used
1095790
1258403
55882
19222
915
1970
256
256
15529
15529
407
.
Chapter 2
Using ROS
45
Advertisement
Table of Contents
