Chapter 5
Setup and Configuration
Figure 104: Remote Table
2.
Select the remote host from the table. The Remote form appears.
4
Figure 105: Remote Form
1. IP Address Box 2. IP Port Box 3. Port(s) Box 4. Apply Button 5. Delete Button 6. Reload Button
3.
Click Delete.
Section 5.4.17
Managing Device Addresses
This section describes how to configure and manage device addresses.
CONTENTS
•
Section 5.4.17.1, "Viewing a List of Device Addresses"
•
Section 5.4.17.2, "Adding a Device Address"
•
Section 5.4.17.3, "Deleting a Device Address"
Section 5.4.17.1
Viewing a List of Device Addresses
To view a list of device addresses configured on the device, navigate to Serial Protocols » Configure Device
Address Table . The Device Address Table table appears.
164
5
RUGGEDCOM ROS
User Guide
1
2
3
6
Managing Device Addresses