Installing A Base Function Tray - Avaya BCM450 Rls 6.0 Task Based Manual

Installing a Base Function Tray

A base function tray can be reinstalled after maintenance, or a new base
function tray installed if the original is defective.
1. Check for a recent backup of the BCM450 programming. If there is no
recent backup, use Element Manager to back up of all the system data.
2. Use Element Manager to shut down the BCM450 system.
3. Disconnect the BCM system from the AC power outlet.
4. Attach one end of the grounding strap to your wrist and the other end to
a grounded metal surface.
5. Move the base function tray levers towards you to the unlocked
position.
6. Position the base function tray in the main unit bay.
7. Insert the base function tray into the main unit.
NN40011-001 Issue 1.2 BCM450 Rls 6.0
BCM450 Hardware & Installation
51