Dicom - Juniper 4VETJ User Manual

DICOM

The /DICOM/ tab lets you configure and save information
regarding a DICOM printer, MWL, and storage. See the
details that follow.
DICOM Printer Configuration
In the DICOM Printer section, enter the following
information:
Host – name of the DICOM server that the printer is
„
connected to
Port – the port number on the DICOM server that the
„
scanner is to be connected to
AET – name of the service on the DICOM server (this field
„
can be empty, unless the service name is not directly
determined on the server.
Once the information is entered, press the "Enable DICOM
printer" option. Confirm the entered changes with the [Save
DICOM Settings] button at the bottom of the screen.
DICOM Modality Worklist Configurations
In the DICOM Modality Worklist (MWL) section, enter
information similar to DICOM Printer Configuration.
In the field "Codepage" select the code served by the
DICOM server from the pull down list. You must get this
information from your DICOM service provider.
Once the information is entered, press the "Enable Modality
Worklist" option. Confirm the entered changes with the
[Save DICOM Settings] button at the bottom of the screen.
Data Storage Configuration
In the DICOM Storage section, enter the same information
you entered in the DICOM Modality Worklist (MWL) section.
Once the information is entered, press the "Enable DICOM
Storage" option. Confirm the entered changes with the
[Save DICOM Settings] button at the bottom of the screen.
44
4VetJ Ultrasound Scanner User's Manual