Presets - Juniper 4VETJ User Manual

Printing During the Examination
To print an image during the examination, freeze the image
and then press [Print] from the basic panel.
In the right bottom corner of the screen a window with print
preview appears.
Press [Print] in the print preview window to print the image,
or [Clear] to decline printing.
Printing Saved Images
To print the previously saved image, upload it on the screen
then press [Print].
In the right bottom corner of the screen a window with print
preview appears.
Press [Print] to print the image or [Clear] to decline printing.
Printing Multiple Images on One Sheet
You can print up to four images on one sheet of paper by
following these steps:
Freeze the image -> press [Print] -> unfreeze the image
and continue the examination -> freeze the image -> press
[Print]. Repeat this activity until a relevant number of images
appear in the print preview window. When you are ready,
press the [Print] button located in the print preview window.

Presets

Presets Activation
The 4VetJ scanner has presets for the liver, kidneys,
abdominal cavity, aorta, thyroid gland, superficial
blood vessels, lungs, musculoskeletal system and hips
examinations.
To activate preset, press the [Presets] button on the basic
panel. A list of available presets appears. Press on the
desired preset name, and the preset is activated.
You can also activate presets from the Preset Management
window using the [Load preset] button.
37
Chapter 2 4VetJ Settings and Functions