Optimization Of B+M And M Modes; Saving And Uploading Images And Cine Loops - Juniper 4VETJ User Manual

Clear
When [Clear] is pressed, all of the elements of a
measurement and the results are removed from the screen.
Measurement elements are also deleted when you unfreeze
an image in the B mode or switch to the B mode from the
other modes.

Optimization of B+M and M modes

Selection of the sweep speed in M mode
To select the sweep speed, press the [B+M Mode] button.
Above the button a submenu appears where you can
select one of the following values: 1s, 2s, 3s, 4s.
Moving the M line
The M line is applied on the B mode image. To change its
location, drag it with a finger to the desired location.
Switching between M and B+M mode
After pressing [B+M mode], a submenu appears on the
screen. The button [M/B+M] is used to switch between the
B+M and M modes.

Saving and Uploading Images and Cine Loops

This function saves frozen images and cine loops to the
internal memory of the scanner.
Animal data and descriptions can also be added and
saved.
Notice: Remember to download the images and cine
loops to external memory devices regularly and clear the
memory of the scanner.
Saving an Image or Cine Loop
To save an image or cine loop, first freeze it from the basic
panel using the [Freeze] button then press [Save Image] or
[Save Cine].
A dialogue box appears with a virtual keyboard. You can
enter patient data when saving an image or cine loop.
31
Chapter 2 4VetJ Settings and Functions