Patient Data Function - Juniper 4VETJ User Manual

2. On the basic panel press the [Open Image] or [Open
Cine] button.
3. A screen with a list of the saved images or cine loops is
shown (see previous graphic).
4. To select an image, go to the first column, Name, and
press on the box next to the name of the item you want
to export. A check mark appears next to the selection.
Press the [Send USB] button. A window showing export
progress is shown.
5. When exporting finishes, choose one of these options:
a. [Close] – Closes the window, but does not
disconnect the external memory, so further
exporting is possible.
b. [Close and eject] – closes the window and allows
you to safely disconnect the external memory from
the system.
Notice: When exporting files, the system creates a folder
called"BF32 save" on the external drive along with a folder
with the date exporting occurred. Separate folders are
created for exported images and cine loops.
Export Images and Cine Loops into DICOM files
You can export data into DICOM files. From the basic panel
press the [Settings] button, then the /DICOM/ tab.
Press either the [Save USB cine in DICOM] or [Save USB
image in DICOM] button. Going forward, data is exported
onto USB storage devices in a DICOM file format.

Patient Data Function

You can enter data into the patient record before
an examination starts. All the data that is entered is
automatically assigned to the saved images and cine
loops.
34
4VetJ Ultrasound Scanner User's Manual