Eco-Power/Standby Features; Sound Quality; Adjusting The Volume; Adjusting The Super Bass - Hitachi AX-M76E Instruction Manual

ECO-Power/Standby Features

This unit features a ECO-Power Standby mode. Press the Standby button to enter standby
mode. To save energy consumption, the clock will not be displayed. If you want to display
the clock during standby mode, you can press the Clock button. The clock display will
disappear after 90 seconds.
GB
If the unit is idle for more than 15 minutes, it will automatically switch to standby mode.

Sound Quality

Adjusting the Volume

To increase or decrease the volume, rotate the volume control knob (– VOLUME +) on the
CD player or press the volume up/down buttons (VOL +/–) on the remote control.

Adjusting the super bass

You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the super bass button (S-BASS) on the remote control to get the effect, the "BASS" will
display on the VFD. Press the super bass button (S-BASS) again to cancel the effect.

Control the Loudness

This unit has a loudness function, it can automatically increase bass sound effect at low
volume (the higher volume, the smaller bass increase). You only need to press the loudness
button (LOUDNESS) on the remote control to obtain the loudness function, the "LOUD" will
display on the VFD.

Preset Equalizer

You can adjust the sound reproduced by pressing the preset equalizer button (P-EQ)
repeatedly. Select from one of the 5 preset equalizer:
POPS JAZZ CLASSIC ROCK FLAT

Changing the VFD Darkness

To dim or brighten the VFD display, repeatedly press the dimmer button (DIM) on the
remote control to the desired brightness.
15