Setting The Clock Automatically; Setting The Clock Manually; Setting The Sleep Timer; To Confirm The Sleep Time - Hitachi AX-M76E Instruction Manual

Setting the Clock Automatically

Tune into a RDS station and wait for a few minutes. To confirm, press the clock button.

Setting the Clock Manually

GB
The built-in clock shows the time on the display.
1. In standby mode, long press the clock button (CLOCK), the VFD will display SET CLOCK
and 24HR indicator will blink.
2. Set the 12/24 hour format with the VOL– or VOL+ button.
3. Press the clock button (CLOCK), hour indicator will blink.
4. Set the hour with the VOL– or VOL+ button.
5. Press the clock button (CLOCK), minute indicator will blink.
6. Set the minute with the VOL– or VOL+ button.
7. Press the clock button (CLOCK), the built-in clock starts operating.
• The operating time of every step shouldn't be longer than 30 seconds or it will return to
the time display.
• If there is a power failure or the systems power is turned off, the clock will lose its setting.

Setting the Sleep Timer

Use the sleep timer to turn the system off after a certain number of minutes when in play
mode. By setting the sleep timer, you can fall asleep to music and know that your system
will turn off by itself rather than play all night.
1. Play a CD or tune in to the desired station.
2. To set the sleep timer press the sleep/timer button (SLEEP/TIMER) on the remote
control repeatedly, it changes the number of minutes shown on the display in this
sequence:
After setting the number of minutes for the sleep timer, the display will return to the
display as before setting the sleep timer.
The system is now set to turn off after the number of minutes you set. The display will
show "

To confirm the sleep time

When the sleep/timer button (SLEEP/TIMER) on the remote control is pressed once, the
remaining sleep time is displayed. Wait for a second until the display returns to the original
display.
22
z".
z
z