Function And Features - Hitachi AX-M20EBS Instruction Manual

FUNCTION AND FEATURES

GENERAL SECTION
SWITCHING THE SYSTEM ON AND PUTTING IT INTO STANDBY MODE
• Switching ON : The STANDBY indicator goes off. The display window backlight lights up.
• Switching to STANDBY : The STANDBY indicator lights up. The display window backlight goes off
and only the clock is indicated.
CLOCK AND TIMER
The player's programmable TIMER can be used to automatically start or stop playing any sound
source or start recording from the radio at a predetermined time. (To set the TIMERS refer to pages
35-36)
Additionally, there is a SLEEP TIMER for automatically putting your set into low power mode if it is
left idle for a preset time period. (Refer to page 35)
ONE TOUCH OPERATION (COMPU PLAY)
• Even when the power is set to STANDBY, pressing one of the buttons shown below will automati-
cally turn on the sound system. A sound source is chosen, and play begins.
CD
TUNING
BAND
TAPE
AUX
• When the OPEN/CLOSE button is pressed, the CD door open/close however the sound source
does not switch.
Note: When switching off the power, be sure to press the STANDBY/ON button.
VOLUME, X-BASS AND OTHER CONTROLS
• VOLUME buttons (using the remote control unit)
+ : Use to increase the volume
– : Use to decrease the volume
EXTRA BASS EFFECT
Pressing the X-BASS [25] Button alternates between Extra Bass ON and OFF.
When X-Bass is ON, the X-BASS indicator will be visible on the LCD display.
ON : X-BASS
OFF : X-BASS
• DIMMER Button (using the remote control unit)
When the power is switched on, pressing this button dims the display window's backlight. When
the button is pressed again, the display window returns to its normal brightness.
• PRESET EQ Button
POPS : More presence in the vocals and midrange
ROCK : Powerful sound emphasizing treble and bass
CLASSIC : Enriched sound with heavy bass and fine treble
JAZZ : Accented lower frequencies for jazz-type music
FLAT : Natural sound
Function mode
When this button is pressed with a CD loaded, CD playback
CD
begins.
TUNER
When this button is pressed, the tuner is engaged.
TAPE
When this button is pressed, the tape is engaged.
A sound source connected to the LINE IN
AUX
(AUX) terminal can be engaged.
indicator lights up. X-BASS sound is activated.
indicator goes off. X-BASS sound is not activated.
Operations
15