Menu System - Kenwood KCA-BT100 Instruction Manual

Menu system

(For Audio receiver)
Menu System
Set up various functions. The Menu system
basic operation method is explained here. The
reference for the Menu items and their setting
content is after this operation explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
2
Select the menu item
Push the Control knob towards [FM] or [AM].
3
Set the menu item
Push the Control knob towards [4] or
[¢].
4
Exit Menu mode
Press the [MENU] button.
• Three menu items appear on the display. The menu
item displayed at the center is the one you can adjust.
In Standby mode
Select the Cell-phone you wish to
connect
When two ore more cell-phones have already
been registered, you need to select the cell-
phone you wish to use.
1
Select the phone selection mode
Push the Control knob towards [FM] or [AM].
Select the "Phone Selection" or "PHN-SEL" display.
2
Enter the selected phone selection mode
Press the Control knob ([38]) for at least 1
second.
"(name)" is displayed.
3
Select the cell-phone you wish to connect
Push the Control knob towards [FM] or [AM].
4
Set up the cell-phone you wish to connect
Push the Control knob towards [4] or
[¢].
"✱(name)" or "-(name)" is displayed.
"✱" (dark color) or "✱": The selected cell-phone
is busy.
"✱" (light color) or "_": The selected cell-phone is
on standby.
10
|
English
5
Exit the phone selection mode
Press the [MENU] button.
In Standby mode
Deleting a Registered Cell-phone
You can delete a registered cell-phone.
1
Select the phone deletion mode
Push the Control knob towards [FM] or [AM].
Select the "Phone Delete" or "PHN-DEL" display.
2
Enter the phone deletion mode
Press the Control knob ([38]) for at least 1
second.
"(name)" is displayed.
3
Select the cell-phone you wish to delete
Push the Control knob towards [FM] or [AM].
4
Delete the selected cell-phone
Press the Control knob ([38]) for at least 1
second.
"Delete" or "DELETE" is displayed.
5
Exit the phone deletion mode
Press the [MENU] button.
• When a registered cell-phone is deleted, its Phone
Book, list of outgoing calls, and list of incoming calls
are also deleted.
Displaying the Cell-phone Status
You can display the connection status, electric
field intensity, and battery level.
1
Select the status display item
Push the Control knob towards [FM] or [AM].
Select the "P-STATUS" display.
2
Enter the status display mode
Press the Control knob ([38]) for at least 1
second.
3
Select the item you wish to display
Push the Control knob towards [FM] or [AM].
4
Exit the status display mode
Press the [MENU] button.
If your control unit supports a graphic
display function:
1
Select the status display item
Push the Control knob towards [FM] or [AM].
Select the "Phone Status" display.
2
Display the statuses
Push the Control knob towards [4] or
[¢].
All statuses are indicated with icons.
3
Exit Menu mode
Press the [MENU] button.
Bluetooth connection status
Display Icon Information
"BT-CON Y" Connected
"BT-CON N" Disconnected
Battery level of cell-phone
Display Icon Information
"BAT FULL" Full
"BAT MID"
"BAT LOW" Nearly dead
"BAT - - -" Cannot get information.
Electric field intensity of cell-phone
Display Icon Information
"SGNL MAX" Maximum
"SGNL MID"
"SGNL LOW" Minimum
"NO SGNAL" Outside the service range
"SGNL - - -" Cannot get information.
• Since the number of steps of the control unit is
different from that of the cell-phone, the statuses
displayed on the control unit may discord from those
displayed on the cell-phone.
In Standby mode
Setting the Time Interval for
Automatic Answer
This function automatically answers (responds to)
a phone call after lapse of the preset time interval
for automatic answer.
Display Setting
"Auto Answer: OFF"/ Does not answer the phone call
"ANS OFF" automatically.
"Auto Answer: 0s"/ Automatically answers the phone call at
"ANS 0" once.
"Auto Answer: 8s"/ Automatically answers the phone call after
"ANS 8" lapse of 8 seconds (original setting).
"Auto Answer: 99s"/ Automatically answers the phone call after
"ANS 99" lapse of 99 seconds.
• If the time set in the cell-phone is shorter than that set
in the unit, the former will be used.
In Standby mode
Setting up the Voice Output
Speakers
You can specify the voice output speakers.
Display Setting
"SP Select: Front"/ Outputs voice from the front-left and front-
"SPK FRT" right speakers.
"SP Select: F-R"/ Outputs voice from the front-right speaker.
"SPK F-R"
"SP Select: F-L"/ Outputs voice from the front-left speaker.
"SPK F-L"
• Select the speaker which is further from the
microphone.
In Standby mode
Setting the Beep of the Incoming
Call
You can output a beep from the speaker when a
call terminates.
Display Setting
"Call Beep: ON"/"C-BP ON" Beep is heard.
"Call Beep: OFF"/"C-BP OFF" Beep canceled.
|
English
11