NEC PH3501QL User Manual page 97

[COLOR CORRECTION]
Corrects the color for all signals.
Adjusts the tone for the colors red, green, blue, yellow, magenta and cyan.
RED HUE
SATURATION
GREEN HUE
SATURATION
BLUE HUE
SATURATION
YELLOW HUE
SATURATION
MAGENTA HUE
SATURATION
CYAN HUE
SATURATION
[COLOR SETTING]
The color range (color reproduction range) of the projected image can be adjusted by inputting the red, green, blue
and white color coordinates of the projection light using a chroma meter that can measure color coordinates.
The specified color (target color: [TCGD]) can be reproduced by measuring the value of the native color (color without
color compensation) and registering it in [MCGD].
Leave the light source on for at least 15 minutes before performing the [COLOR SETTING] in order to stabilize the
brightness.
First set the [MCGD] color coordinates using the chroma meter, then set the color coordinates you want to display
as the [TCGD]s.
We recommend using a spectral radiance meter with a narrow wavelength range that is capable of measuring the
color range.
NOTE:
• The color setting cannot be performed when [HIGH-BRIGHT] has been selected for [DETAIL SETTINGS].
[SETTING]
Enables/disables the color setting.
When enabled, [MCGD] and [TCGD] can be set.
[MCGD]
Enter the color coordinates of the projected image.
REFERENCE ........... Read the setting values of the RED/GREEN/BLUE/WHITE color coordinates.
STANDARD: This loads the factory settings. The red, green, blue and white color coordinates cannot be input.
USER1/USER2: Two user settings can be registered here.
RED/GREEN/BLUE/WHITE
.............................. Set the color coordinates.
+ Direction Magenta direction
− Direction Yellow direction
+ Direction Vivid
− Direction Weak
+ Direction Yellow direction
− Direction Cyan direction
+ Direction Vivid
− Direction Weak
+ Direction Cyan direction
− Direction Magenta direction
+ Direction Vivid
− Direction Weak
+ Direction Red direction
− Direction Green direction
+ Direction Vivid
− Direction Weak
+ Direction Blue direction
− Direction Red direction
+ Direction Vivid
− Direction Weak
+ Direction Green direction
− Direction Blue direction
+ Direction Vivid
− Direction Weak
80
5. Using On-Screen Menu