NEC PH3501QL User Manual page 128

NETWORK SERVICE
HTTP SERVER
PJLink
AMX BEACON
Extron XTP
Set a password for your HTTP server.
Configure the settings for using PJLink.
To use this function, connect the LAN cable to the HDBaseT port.
PASSWORD ........... Set the password.
CLASS ................... To use functions with PJLink Class 2 specifica-
tions, set [CLASS 2].
NOTE:
• Do not forget your password. However, if you forget your password,
consult with your distributor.
• What is PJLink?
PJLink is a standardization of protocol used for controlling projectors
of different manufacturers. This standard protocol is established by
Japan Business Machine and Information System Industries Associa-
tion (JBMIA) in 2005.
The projector supports all the commands of PJLink Class 1.
• Setting of PJLink will not be affected even when [RESET] is done from
the menu.
Turn on or off for detection from AMX Device Discovery when
connecting to the network supported by AMX's NetLinx control
system.
To use this function, connect the LAN cable to the HDBaseT port.
TIP:
When using a device that supports AMX Device Discovery, all AMX
NetLinx control system will recognize the device and download the ap-
propriate Device Discovery Module from an AMX server.
ON will enable detecting the projector from AMX Device Discovery.
OFF will disable detecting the projector from AMX Device Discovery.
Set for connecting this projector to the Extron XTP transmitter.
To use this function, connect the LAN cable to the HDBaseT port.
ON will enable to connect with the XTP transmitter.
OFF will disable to connect with the XTP transmitter.
111
5. Using On-Screen Menu
Up to 10 alphanumeric
characters
Up to 32 alphanumeric
characters
—
—