NEC PH3501QL User Manual page 115

[INSTALLATION(2)]
[SHUTTER SETTINGS]
Enabling and disabling the lens shutter function. You can also set how long the light will take to fade in and fade out
when either the SHUTTER button.
POWER ON OPEN
SHUTTER
CLOSE
PICTURE MUTE OPEN
SHUTTER
CLOSE
FADE IN TIME Set how long the light will take to fade in after the SHUTTER button is pressed.
The time can be set from 0 to 10 seconds in increments of 1 second.
FADE OUT TIME Set how long the light will take to fade out after the SHUTTER button is pressed.
The time can be set from 0 to 10 seconds in increments of 1 second.
Using the Reference Lens Memory Function [REF. LENS MEMORY]
This function serves to store the adjusted values common to all input sources when using the LENS SHIFT, ZOOM
and FOCUS buttons of the projector or the remote control. The adjusted values stored in memory can be used as a
reference to the current.
PROFILE ................ Select a stored [PROFILE] number.
STORE ................... Stores the current adjusted values in memory as a reference.
MOVE .................... Applies the adjusted reference values stored in [STORE] to the current signal.
RESET .................... Reset selected [PROFILE] number [REF. LENS MEMORY] to the factory default settings.
LOAD BY SIGNAL .. When you switch signals the lens will shift to the lens shift, zoom, and focus values for the selected [PRO-
FILE] number.
If no adjusted values have been saved to [LENS MEMORY], the lens will apply [REF. LENS MEMORY]
adjusted values. Alternatively, if no adjusted values have been saved to [REF. LENS MEMORY], the unit will
return to factory default settings.
FORCED MUTE ...... To turn off the image during lens shift, select [YES].
NOTE:
• Adjusted values in [REF.LENS MEMORY] will not be returned to default when performing [CURRENT SIGNAL] or [ALL DATA] for
[RESET] from the menu.
• To store adjusted values for each input source, use the Lens Memory function. (→ page 89)
When the power is turned on, the lens shutter opens and the picture is projected.
The lens shutter remains closed even when the power is turned on. Press the
SHUTTER button to open the shutter and project the picture.
The lens shutter remains open when the picture disappears e.g. when the input
terminal is switched and so on.
The lens shutter closes when the picture disappears e.g. when the input terminal
is switched and so on.
98
5. Using On-Screen Menu