Table of Contents
Advertisement
If you use the clock functions:
Duration, End Time, the oven
turns off the heating elements
after 90 % of the set time.
The oven uses the residual
heat to continue the cooking
process until the time ends (3
- 20 minutes).
7.2 Setting the clock functions
Before you use the functions:
Duration, End Time, you must
set a heating function and
temperature first. The oven
turns off automatically.
You can use the functions:
Duration and End Time at the
same time if you want to
automatically turn on and turn
off the oven on a given time
later.
The functions: Duration and
End Time do not work when
you use the core temperature
sensor.
1. Set a heating function.
2. Press
display shows the necessary clock
function and the related symbol.
3. Press
time.
4. Press
When the time ends, a signal sounds. The
oven turns off. The display shows a
message.
5. Press any symbol to stop the signal.
7.3 Heat + Hold
Conditions for the function:
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
8.1 Automatic programmes
The automatic programmes give optimum
settings for each type of meat or other
recipes.
again and again until the
or
to set the necessary
to confirm.
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It
turns on after the baking or roasting
procedure ends.
You can turn on or turn off the function in
the menu: Basic Settings.
1. Turn on the oven.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
again and again until the
display shows: Heat + Hold.
5. Press
to confirm.
When the function ends, a signal sounds.
The function stays on if you change the
heating function.
7.4 Time Extension
The function: Time Extension makes the
heating function continue after the end of
Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, a signal
sounds. Press any symbol.
The display shows the message.
2. Press
to turn on or
3. Set the length of the function.
4. Press
.
• Meat programmes with the function:
Weight Automatic (menu: Recipes) —
This function automatically calculates
the roasting time. To use it you need to
input food weight.
• Meat programmes with the function:
Food Sensor Automatic (menu:
Recipes) — This function automatically
calculates the roasting time. To use it
ENGLISH
15
to cancel.
Advertisement
Table of Contents
