Upgrade; Logoff - Q-See QT428 User Manual

DVR MANAGEMENT
Note: you need to format the hard disk before recording. The screen will show the size of the drive,
amount of free space, and percentage of used space at the bottom of the screen.
Step 2: Click Refresh button to refresh the disk information of the list box; set the property of the disk then
click Apply button to save the setting
Step 3: Select the hard disk, click Format button to start format.
Note: all recorded files in the hard disk will be lost after formatted.
6.1.8

Upgrade

At present, it only supports USB update. Get the firmware from Q-See when there is a new firmware version,
and make sure it is the correct one for the DVR. User can check the USB information in Disk manager.
6.1.9

Logoff

Click Log off icon, a log off dialogue box will popup, click OK button, the device will log off. If user wants to log
in again, click icon to enter user name and password to login again.
52 | P a g e
QT428 User Manual