Alarm Configuration; Sensor (To Setup Optional External Motion Sensors) - Q-See QT428 User Manual

H.264 dual stream network dvr 8 channel cif@240fps & d1@60fps digital video recorder

Hide thumbs Also See for QT428:

Table of Contents

MAIN MENU SETUP GUIDE

QT428 User Manual

4.5 Alarm Configuration

Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.

Sensor includes three sub menus: basic, alarm handling and schedule.

① Basic

Step 1: Enter into system configurationalarm configurationsensorbasic; refer to Fig 4-19:

Fig 4-19 Alarm Configuration-Sensor Basic

Step 2: Enable sensor alarm, set the alarm type according to triggered alarm type. Two options: NO (normally open)

and NC (normally closed).

Step 3: User can setup all channels with same parameters, checkmark "all", then to do relevant setup.

Step 4: Click "default" button to restore default setting; click "apply" button to save the setting; click "exit" button to

exit current interface.

②

Alarm Handling

Step 1: Enter into system configurationalarm configurationsensoralarm handling; refer to Fig 4-20:

Fig 4-20 Alarm Configuration-Sensor-Alarm Handling

29 |

P a g e

Table of Contents

Show Quick Links

Table of Contents