Video Parameters Setup - Q-See QSC26404 User Manual

Date OSD Position
In "Camera" menu you can adjust the position where you want the Date to
display, move active frame to "Position" on the right side of "Date OSD" and press
the【ENTER】 button. Then you will see the picture below. Use 【↑】 【↓】 【←】 【→】
to adjust the position of the date.
5.6

Video Parameters Setup

For different cameras and different backgrounds, in order to get the best video
image, you may need to adjust video parameters such as brightness, saturation,
contrast and hue, etc.
You can setup each camera individually, and you can also copy the video
parameters of one camera to any other cameras. Here are the setup steps:
Step 1: Enter into "Camera", select a camera then enter "Color setup" menu
shown as fig5.12
QSC26404 User's Manual
Fig 5.11 Set position of Date & Time
42